工艺与制造英文2007被引 28
Multiscale fiber‐reinforced composites prepared by vacuum‐assisted resin transfer molding
Young Seok Song
摘要整理
Abstract Carbon nanotube (CNT)/aramid fiber epoxy composites were produced using a new manufacturing method proposed in this study. The rheological and morphological experiments of the CNT/PEO nanocomposites indicates that the PEO nanocomposites have a good dispersion state of the CNTs. The flexural mechanical properties of the aramid fiber/CNT epoxy composites were measured. The CNTs dispersed in the epoxy resin between the aramid fibers were observed using field emission scanning electron miscroscope (FESEM). It was found that the flexural properties of the multiscale fiber‐reinforced composites were higher than those of aramid fiber/epoxy composites. POLYM. COMPOS., 28:458–461, 2007. © 2007 Society of Plastics Engineers.
相关论文
A review of recent developments in natural fibre composites and their mechanical performance
Composites Part A Applied Science and Manufacturing · 2015
Non-invasive electrical and magnetic stimulation of the brain, spinal cord, roots and peripheral nerves: Basic principles and procedures for routine clinical and research application. An updated report from an I.F.C.N. Committee
Clinical Neurophysiology · 2015
Lignocellulosic biomass: a sustainable platform for the production of bio-based chemicals and polymers
Polymer Chemistry · 2015
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
CIRP Annals · 2016
Nanoimprint Lithography: Methods and Material Requirements
Advanced Materials · 2007
Nanocomposites: synthesis, structure, properties and new application opportunities
Materials Research · 2009
← 返回论文库整理：复材站编辑部