Digital Manufacture of a Continuous Fiber Reinforced Thermoplastic Matrix Truss Core Structural Panel Using Off-the-Tool Consolidation
摘要整理
Sandwich panels are commonly used as structure, based on fiber reinforced composites, with the goal of high flexural stiffness and low mass. It is most common to separate two high performance composite facesheets with a low-density core, generally in the form of a foam or honeycomb. A recent concept has been to replace these traditional core materials with fiber reinforced truss-like structures, with the goal of further reducing mass. A system is described that can radically reduce the amount of tooling required for truss core sandwich panel manufacture. This system, which is a digital manufacturing platform for the extrusion of continuous fiber reinforced commingled glass fiber/PET tow, was developed to demonstrate the rigidization of composites both on, and off, a tool surface. Navtruss core panels were successfully manufactured using this digital manufacturing platform, without conventional tooling, and the resulting through thickness compression moduli and panel shear moduli were within 14.6% and 23% of the values baseline compression molded specimens. Thus, the results suggest that, with further development, complex truss core structures with performance approaching that of compression molded panels can be manufactured with radically reduced tooling requirements from high volume fraction, continuous fiber reinforced thermoplastic matrix composites.